In the production process of organic fertilizer production line, the crusher is a very key link. However, sometimes we encounter the problem that the yield of the mill is not standard. This not only affects production efficiency, but may also have an impact on product quality. Below, we will analyze the reasons for the non-standard output of organic fertilizer crushers.

1. Blade design: The design of the blade directly affects the effect of material crushing, if the blade is not sharp enough or uneven arrangement, it will affect the output.

2. Speed: too high or too low speed will affect the output. Too high may lead to faster blade wear, too low may not achieve the crushing effect.

3. Material properties: Organic fertilizers of different properties, such as humidity, particle size, etc., have a direct impact on the output of the crusher.

4. Operating conditions: such as working time, lubrication, cleanliness, etc., will affect the performance of the crusher.

In addition, the following reasons may also lead to non-standard production of organic fertilizer shredders:

1. Blade wear: If the blade wear is serious, it will affect the crushing effect, thus affecting the output.

2. Insufficient lubrication: Insufficient lubrication will lead to faster blade wear, which will affect the output.

3. Material blockage: If the feed port is blocked, it will affect the feed speed, and then affect the output.

4. Equipment aging: Long-term use leads to the aging of organic fertilizer equipment, which will also affect the output of the crusher.

In order to solve this problem, we need to regularly inspect and maintain the crusher to ensure its normal operation. At the same time, we also need to adjust the parameters of the machine according to different material properties and operating conditions to achieve the best yield.