Organic fertilizer crusher is an important equipment for the treatment of organic waste, but in the use of organic fertilizer production line, it often encounters the problem of wall sticking and material blocking, which affects the efficiency and life of the equipment. This article describes ways to help users avoid these problems.

1, choosing the right grinding particle size is crucial. If the particle size is too large, it will increase the load of organic fertilizer equipment and increase the probability of plugging; If the particle size is too small, it is easy to cause sticky wall. Therefore, according to the actual material characteristics, choose the appropriate grinding particle size.

2, ensure that the feed is uniform and appropriate. Too much or too little feed may lead to clogging, so it is necessary to control the feed speed and quantity to ensure that the feed is uniform and appropriate. At the same time, pay attention to the operation of the equipment during the feeding process, and deal with anomalies in time.

Keeping the inside of the equipment clean is the key to preventing clogging. Periodically clean the residual materials inside the device to prevent them from hardening and clogging the device. At the same time, pay attention to the wear of the device, and replace the worn parts in time to ensure the normal operation of the device.

3, reasonable allocation of anti-sticking wall device is also an important measure to avoid sticking wall. For example, a scraper or water jet can be installed inside the device to prevent the material from sticking to the wall. At the same time, attention should be paid to controlling the water content of the material to avoid the material being too wet and causing the wall to stick.