1. Regular inspection: Regular inspection of organic fertilizer equipment to ensure the normal operation of all components, timely detection and troubleshooting.

2. Lubrication maintenance: According to the equipment instruction manual, add lubricating oil to the transmission parts regularly to ensure smooth operation.

3. Cleaning and hygiene: After each use, clean the residue on the equipment in time to keep the equipment clean.

4. Moisture and rust prevention: The equipment should be stored in a dry and ventilated place to avoid corrosion caused by damp environment.

5. Parts inspection and replacement: regularly check the wear of equipment parts, such as serious wear, should be replaced in time.

6. Electrical system maintenance: Check the electrical system regularly to ensure that the line is intact, no leakage, short circuit and other safety hazards.

7. Shutdown maintenance: During the equipment downtime, idling should be carried out regularly to maintain the normal operation of the equipment.

8. Train the operator: ensure that the operator is familiar with the use and maintenance methods of the equipment to improve the level of operation.

9. Regular maintenance: According to the use of equipment, regular maintenance to ensure long-term stable operation of organic fertilizer production line.

10. Establish maintenance files: record the maintenance and repair of equipment to provide a basis for future maintenance.

1. Reasonable location: Choose a flat and spacious site to ensure stable installation of organic fertilizer equipment. At the same time, factors such as ventilation and drainage should be considered to ensure a good production environment.

2. Preparation: Before installation, read the equipment manual carefully to understand the structure, principle and operation method of the double roller press granulator. Prepare necessary tools and materials, such as wrenches and screwdrivers.

3. Unpacking the equipment: carefully unpack the equipment box and check whether the internal parts are intact. If there is damage or missing, contact the supplier in time.

4. Parts assembly: Assemble the parts into a complete device according to the requirements of the manual. In the assembly process, pay attention to the installation sequence and tightening degree of the parts.

5. Electrical connection: Ensure that the power cable of the device is correctly connected, turn on the power, and check whether the device can start normally. If any exception occurs, rectify the fault in time.

6. Commissioning operation: When the equipment is assembled and the electrical connection is correct, the no-load commissioning is carried out. Observe whether the equipment runs smoothly, whether the noise is too large, if there is a problem, adjust in time.

7. Load debugging: After no-load debugging is normal, gradually increase the load to check whether the equipment can work normally. If there is an abnormal phenomenon, check the cause in time.

8. Lubrication maintenance: Regularly lubricate the transmission parts of the equipment to extend the service life of the parts.

9. Safety protection: Ensure that safety protection measures are set up around the equipment to avoid accidental injuries during operation.

10. Train operators: Train operators to master the knowledge of equipment operation and maintenance.

1. Material characteristics: Different material characteristics require different grinding equipment and parameters, which will affect the price of organic fertilizer equipment.

2. Equipment structure: The structure design of half-wet material crusher includes rotor speed, blade shape, screen aperture and so on. Complex structural designs and high quality materials can lead to price increases.

3. Crushing strength: Adjust the appropriate crushing strength according to the characteristics of the material to ensure the crushing effect. Different crushing forces will affect the price of the equipment.

4. Feed speed: Feed speed will affect the load and output of the mill. Rapid feeding requires higher performance equipment, so the price is higher.

5. Screening equipment: The selection of screening equipment and screen aperture have an important impact on the size and output of crushed particles, and will also affect the price of equipment.

6. Motor power: motor power is closely related to the speed and crushing capacity of the mill. The higher power motor is more expensive, but it can improve the crushing effect.

7. Equipment brand and quality: Well-known brands and high-quality equipment usually have better performance and after-sales service, so the price is higher.

8. Market demand and supply: Market demand and supply relations will affect the price of semi-wet material shredders for organic fertilizer equipment. Prices may rise during peak seasons; Prices may drop during the low season.

9. Transportation and installation costs: Factors such as transportation distance, equipment weight and installation difficulty will affect the final price of the equipment.

The ball shaping machine in the organic fertilizer production line is mainly used for polishing and shaping the made particles to make their appearance more beautiful and improve product quality. However, the round polishing machine is not a necessary equipment in the production line of granular organic fertilizer. Whether you need to be equipped with a round polishing machine depends on your production needs and product quality requirements.

Whether the pellet fertilizer production line needs to be equipped with a round polishing machine mainly depends on the following factors:

1, product demand: if the market has high requirements for the appearance of granular fertilizer, hoping that the shape of granular fertilizer is uniform and smooth, then equipped with a round polishing machine can improve the quality and beauty of the product.

2, production scale: if the production scale is large, the need to produce a large number of granular fertilizer, then equipped with a round polishing machine can improve production efficiency and reduce manual operation.

3, investment budget: round throwing machine is a more professional organic fertilizer equipment, requires a certain investment. If the enterprise budget is limited, you can consider not equipped with a round polishing machine in the initial stage, and wait for the production scale and market demand to gradually increase before upgrading the equipment. Technical strength: the operation and maintenance of the round polishing machine requires certain technical support, if the enterprise lacks relevant technical personnel, it may increase the difficulty of management and maintenance.

If you want to produce organic fertilizer particles with high quality, and the market demand also has high requirements for product quality, then equipped with a round polishing machine is a good choice. However, if the organic fertilizer you produce is mainly for the rural market, or the quality of the product is not high, then equipped with a round polishing machine is not necessary.

1. Regular inspection: Regular comprehensive inspection of the organic fertilizer granulator to ensure the normal operation of the components, if there is damage or serious wear parts, should be replaced in time.

2. Lubrication maintenance: According to the equipment instruction manual, regularly add lubricating oil to the moving parts of the organic fertilizer granulator to ensure smooth operation.

3. Cleaning and hygiene: regularly clean the residual materials inside the organic fertilizer granulator to prevent the accumulation of materials resulting in poor operation of the equipment. At the same time, keep the environment around the equipment clean to avoid dust and debris affecting the operation of organic fertilizer equipment.

4. Moisture and rust prevention: the organic fertilizer granulator should be placed in a dry and ventilated place to avoid corrosion of the equipment in a humid environment. If the equipment is rusted, gently sand it with sandpaper and then apply anti-rust oil to protect it.

5. Regular maintenance: For the vulnerable parts of the organic fertilizer granulator, such as bearings, motors, etc., regular maintenance to ensure the stable operation of the organic fertilizer production line.

6. Correct operation: When operating the organic fertilizer granulator, the operating procedures should be followed to avoid damage to the equipment caused by misoperation.

7. Training operators: Professional training for the operation of organic fertilizer granulator personnel, so that they are familiar with the equipment performance, operation methods and maintenance knowledge.

8. Establish and improve equipment files: record the use of organic fertilizer granulator in detail, maintenance records, etc., which is conducive to mastering the operating status of equipment, timely discovery and solution of problems.

Following the above maintenance methods can extend the service life of the organic fertilizer granulator, ensure the stable operation of the equipment and improve production efficiency.

1. Rich in nutrients: poultry manure contains a lot of nitrogen, phosphorus, potassium and other nutrients required for plant growth, which is a high-quality raw material for the preparation of organic fertilizer.

2. Contains more organic matter: poultry manure has a higher content of organic matter, which is conducive to improving soil structure and increasing soil fertility.

3. A wide variety of microorganisms: poultry manure is rich in a variety of microorganisms, including beneficial microorganisms and harmful microorganisms. In the process of organic fertilizer production line, beneficial microorganisms are retained, which helps to promote the improvement of soil microbial environment.

4. Removal of pathogens and harmful substances: During the processing of organic fertilizer production line, through fermentation, drying and other processes, pathogens and harmful substances in poultry feces can be effectively removed to ensure the safety of the final product.

5. Processing technology Environmental protection and high efficiency: organic fertilizer production line adopts environmental protection technology, which is conducive to reducing the pollution of poultry manure to the environment and realizing resource utilization.

6. Various product forms: Organic fertilizer production line can produce granular, powdered and other forms of organic fertilizer through organic fertilizer equipment to meet different market needs.

7. Improve crop yield and quality: Organic fertilizer prepared with poultry manure can improve crop yield and quality, which is conducive to sustainable agricultural development.

In short, poultry manure processing in organic fertilizer production lines has many advantages, can provide safe and efficient organic fertilizer for agricultural production.

1. Preparation before starting: check whether the components of the organic fertilizer equipment are firmly connected to ensure that there is no loosening; Check whether the power, water and air supply are normal, ensure that the production line has the start-up conditions, and check the material supply system to ensure that the raw materials are sufficient.

2. Boot operation: Turn on the power supply, start the equipment, and slowly start the material supply system to ensure that the materials evenly enter the organic fertilizer production line.

Adjust equipment operating parameters to meet production requirements.

3. Precautions during operation: Closely observe the operating status of the device, and stop the device for inspection in time if any exception is found. Check the lubrication of the equipment regularly to ensure the smooth operation of the equipment. Keep the production line clean to avoid foreign matter entering the equipment and affecting the production quality.

4. Shutdown operation: Stop the material supply system after the completion of the production task. Wait until the material in the production line is processed, and then shut down the equipment. Turn off the power, water, and air sources to ensure device safety.

5. Equipment maintenance and maintenance: Regular maintenance of the equipment to ensure stable operation of the equipment. Clean and disinfect the production line regularly to ensure the hygienic production environment.

6. Safety protection: Operators should wear labor protection supplies to prevent accidental injury. Non-operators are strictly prohibited from approaching the production line to ensure personnel safety.

7. Troubleshooting: If the equipment fails, it should be stopped immediately to check, find out the cause and repair. If you cannot handle it yourself, you should contact after-sales service personnel or professional maintenance teams in time. 
 Following the above operation technical requirements can ensure the normal operation of the organic fertilizer production line equipment, improve production efficiency and reduce the failure rate.

In the fermentation process of organic fertilizer production line, the temperature control of materials has the following requirements:

1. Fermentation starting temperature: When fermentation starts, the temperature of the material should be controlled at about 15-20 degrees Celsius, which is the appropriate temperature for the growth of most microorganisms.

2. Temperature fluctuation range: During the fermentation process, the temperature fluctuation of the material should be controlled within ±5 degrees Celsius as far as possible. Excessive temperature fluctuations may affect microbial growth and fermentation processes.

3. Fermentation end temperature: At the end of fermentation, the temperature of the material should be controlled at about 40-50 degrees Celsius. This is to ensure that fermentation takes place adequately, while avoiding excessive temperatures that adversely affect microorganisms.

4. Temperature monitoring: During the fermentation process of organic fertilizer equipment, the temperature of the material should be regularly monitored to ensure that it is within the appropriate range. Too low or too high a temperature will affect the fermentation effect and fertilizer quality.

5. Temperature adjustment measures: If the temperature of the material is found to deviate from the appropriate range, corresponding measures should be taken to adjust.

In short, in the fermentation process of organic fertilizer production line, the temperature control requirements for materials mainly include fermentation start temperature, fermentation suitable temperature, temperature fluctuation range, fermentation end temperature and temperature monitoring and regulation. Following these requirements helps to improve the fermentation effect and fertilizer quality.

Rotary drum granulator is a commonly used equipment in the production of organic fertilizer, its main characteristics are as follows:

1. Compact structure, small footprint: The structural design of the rotary drum granulator makes it have a small footprint, saving production space and reducing production costs.

2. Easy to operate and easy to maintain: rotary drum granulator adopts automatic control system to make the operation more simple, while reducing the failure rate of organic fertilizer equipment, easy to maintain.

3. Beautiful particle shape and good quality: The particle shape produced by the rotary drum granulator is beautiful, uniform, and has good fluidity, which is conducive to improving the quality of organic fertilizer.

4. Strong adaptability and wide range of applications: rotary drum granulator is suitable for organic fertilizer production of different raw materials and production processes, which can meet various production needs.

5. Energy saving and environmental protection, reduce energy consumption: rotary drum granulator adopts efficient energy-saving design, reduces energy consumption, is conducive to reducing production costs, while reducing the impact on the environment.

6. High safety, low noise: rotary drum granulator in the operation process of low noise, to ensure the comfort of the working environment, while using safety protection measures to ensure the safety of personnel.

7. High degree of automation and high production efficiency: rotary drum granulator adopts automatic control system to achieve continuous production of organic fertilizer production line, improve production efficiency and reduce labor intensity.

1. Regular cleaning: Regularly clean the impurities and residues inside the organic fertilizer dryer to prevent the blockage of organic fertilizer equipment and ensure the drying effect.

2. Check the bearing: regularly check the dryer bearing, fill the lubricating oil, to ensure that the bearing runs smoothly, extend the service life.

3. Maintenance belt: Check whether the dryer belt is damaged and worn, and replace the damaged belt in time to ensure the normal operation of the equipment.

4. Check the motor: regularly check the dryer motor, ensure that the motor insulation is good, no abnormal sound, timely replacement of damaged motor parts.

5. Maintain the heating device: check the heating device of the dryer to ensure uniform heating, no leakage, short circuit and other phenomena, and replace the damaged heating element in time.

6. Periodically check the connection bolts of each part of the dryer to ensure that they are firmly connected to prevent loose bolts from damaging the equipment.

7. Keep the environment around the equipment sanitary: regularly clean up the debris around the dryer to prevent dust, garbage, etc., from entering the equipment, affecting the drying effect.

8. Regular maintenance: According to the use of the equipment, regular comprehensive maintenance, replace the damaged parts, to ensure that the organic fertilizer production line is in good running condition.

9. Strictly abide by the operating procedures: the operator should be familiar with the operating procedures of the dryer, use the equipment correctly, and avoid damage to the equipment caused by improper operation.

10. Regular maintenance: According to the requirements of the equipment maintenance manual, regular maintenance is carried out to extend the service life of the equipment. 
 I hope you find the above suggestions helpful.

1. Policy support: The Chinese government attaches great importance to the development of organic fertilizer industry and has introduced a series of policy measures to encourage and support the production and application of organic fertilizer, such as new agricultural modernization, agricultural green development, circular economy and so on.

2. Market demand: With people's pursuit of healthy quality of life, the market demand for green and environmentally friendly organic fertilizers continues to increase, promoting the development of organic fertilizer industry.

3. Industrial upgrading: With the development of science and technology, the technical level of organic fertilizer equipment continues to improve, the equipment performance is more stable, the production efficiency is higher, and the production cost is reduced, making the organic fertilizer industry more competitive.

4. Environmental awareness: The development of organic fertilizer production line industry helps to reduce the use of chemical fertilizers and reduce pollution to the environment, in line with the current trend of increasing environmental awareness.

5. Agricultural modernization: The development of organic fertilizer production line industry helps promote agricultural modernization, improve agricultural comprehensive production capacity, and ensure national food security.

6. Industrial chain expansion: The development of organic fertilizer industry has driven the expansion of related industrial chains, such as organic waste treatment, organic fertilizer research and development, organic agricultural technical services, etc., providing strong support for the sustainable development of the industry.

7. Rural revitalization strategy: The development of organic fertilizer industry is conducive to the implementation of rural revitalization strategy, improve rural economic efficiency, and promote farmers' income. 
 In summary, many factors such as policy support, market demand, industrial upgrading, environmental awareness, agricultural modernization, industrial chain expansion and rural revitalization strategy have jointly promoted the rapid development of organic fertilizer equipment industry.

1. Environmental protection: The granular organic fertilizer produced by organic fertilizer equipment can effectively reduce the pollution of agricultural waste and domestic waste to the environment and improve the utilization rate of resources.

2. High-quality fertilizer: granular organic fertilizer is rich in organic matter, nitrogen, phosphorus, potassium and other nutrients, which helps to improve soil fertility and promote crop growth.

3. Sustainable development: Organic fertilizer production lines help realize the utilization of agricultural waste resources, reduce the dependence on chemical fertilizers, and promote the green, low-carbon and circular development of agriculture.

4. Increase the yield and quality of agricultural products: granular organic fertilizer is rich in nutrients, which helps to improve the yield and quality of agricultural products and increase farmers' income.

5. Economic benefits: The market demand for organic fertilizer is growing year by year, and the granular organic fertilizer produced by organic fertilizer equipment has better economic benefits, which can create stable earnings for enterprises.

6. Social responsibility: Organic fertilizer production line helps to improve the level of environmental protection, achieve green development, and fulfill corporate social responsibility. 
 In short, the granular organic fertilizer produced by organic fertilizer equipment has good practical value and development prospects.

Organic fertilizer equipment is a kind of equipment used to make biological fertilizer from animal and plant residues, excrement and other organic wastes through fermentation, mixing, granulation and other processes. The following will introduce the process flow and installation and maintenance of the organic fertilizer production line in detail.

First, organic fertilizer equipment process:

1. Fermentation: The collected organic waste will be fermented to achieve the appropriate temperature and humidity to promote the growth of microorganisms.

2. Ingredients: Mix the fermented organic waste with binder, functional bacteria, nitrogen, phosphorus, potassium and other nutrients in a certain proportion.

3. Mixing: the ingredients into the multi-dimensional high-efficiency mixer for rapid mixing, to ensure that the material is fully uniform.

4. Granulation: the mixed material is sent to the extrusion granulator, and the material is extruded into columnar particles through a high-speed rotating template.

5. Polishing and shaping: the cylindrical particles are sent to the round particle polishing and shaping machine to polish and form spherical particles.

6. Drying: the ball particles are sent into the drying, cooling, screening machine for drying treatment, so that its moisture reaches the specified range.

7. Cooling: The dried particles enter the cooling section for air cooling, so that its temperature is reduced to normal temperature.

8. Screening: the cooled particles are sent to the screening machine to separate the finished particles that meet the specifications.

9. Packaging: The finished particles screened out are measured, packed and stored.

Second, installation and maintenance of organic fertilizer equipment:

10. Installation: The organic fertilizer equipment should be installed on a horizontal concrete foundation and fixed with foot bolts. Pay attention to the vertical of the main body and the horizontal when installing.

11. Check: After the installation is complete, check whether the bolts in each part are loose and whether the main engine compartment door is fastened.

12. Test run: After the inspection, carry out no-load test run. Production can be carried out only after the test run is normal.

1. Determine the type of machine: according to the production scale and operating environment of your organic fertilizer production line, choose the right organic fertilizer crusher.

2. Consider power: Choose a machine with enough power to ensure that organic fertilizer can be easily crushed. In general, the greater the power, the higher the crushing efficiency.

3. Check the blade design: The blade design of the organic fertilizer mill has a great impact on its performance. Choose machines with sharp blades that are suitable for organic fertilizer processing.

4. Check noise levels: Noise levels are an important consideration, especially in home use or farm working environments. Choosing organic fertilizer equipment with low noise can reduce the impact on the surrounding environment.

5. Consider durability: Organic fertilizer shredders need to withstand frequent organic fertilizer processing work, so it is very important to choose a machine with good durability. Check that the materials, bearings and construction of the machine are optimized to handle this workload.

6. Check the convenience of operation and maintenance: consider whether the operation and maintenance of the machine is convenient. Choosing machines that are easy to operate and maintain can save time and money.

7. Consider after-sales service: When purchasing, find out about the manufacturer's after-sales service and support. Choosing a manufacturer with a good reputation and reliable support can ensure that problems are addressed in a timely manner when they arise.

Cow manure organic fertilizer production line is a production line specially used for the production of organic fertilizer. It mainly uses cow manure as the main raw material, and converts it into efficient organic fertilizer through a series of processing and treatment.

The production line usually consists of the following main steps:

1. Collect cow manure: First of all, it is necessary to collect a large amount of cow manure, which is the basic raw material for the production of organic fertilizer.

2. Crushing and screening: The collected cow manure needs to be broken and screened with organic fertilizer equipment to break large pieces of manure into small pieces, while separating larger particles from smaller particles to facilitate subsequent processing.

3. Fermentation and deodorization: Cattle manure after crushing and screening needs to be fermented and deodorized to eliminate the odor and harmful substances, while improving its fertilizer efficiency.

4. Add auxiliary materials: After fermentation and deodorization, it is usually necessary to add some auxiliary materials to cow manure, such as humic acid, microbial bacteria, etc., to enhance its fertilizer efficiency and stability.

5. Mixing and granulation: the cow manure added with auxiliary materials is mixed and granulated to make a granular fertilizer of moderate size, which is convenient for storage and use.

6. Packaging and transportation: Finally, the finished organic fertilizer needs to be packaged and transported in order to be easy to sell and use.

In short, cow manure organic fertilizer production line is an efficient and environmentally friendly organic fertilizer production mode, it can not only improve the yield and quality of organic fertilizer, but also reduce environmental pollution, is a sustainable agricultural production mode.

First, check before operation

Before starting to operate the disc granulator, you should carefully check whether the components of the organic fertilizer equipment are in good condition and whether there are abnormal sounds and vibrations. Check whether the transmission belt is worn and adjust the belt tension. In addition, the power connection should also be checked to ensure that there are no obstacles around the machine to create a safe environment for operation.

Ii. Precautions during operation

1. Before starting the machine, ensure that all staff have left the operation area of the machine and ensure that the machine is in a safe state.

2. After starting the machine, it should be idled for a period of time to check whether the machine is running normally and whether there is abnormal sound or vibration.

3. During operation, do not place items such as hands or tools on or near the disk to avoid danger.

4. When adjusting the speed of the disk, it should be carried out slowly, and observe whether the shape and size of the particles meet the requirements at any time.

5. When adding materials, the materials should be evenly scattered on the disk to avoid excessive or low material accumulation. At the same time, care should be taken not to allow items such as hands or tools to reach into the hopper.

6. Regularly clean the residual materials inside the machine, so as not to affect the quality and output of particles.

7. During the operation of the organic fertilizer production line, if abnormal sound, vibration, overheating and other abnormal conditions are found, the machine should be stopped immediately for inspection.

Third, clean up after the operation

After the operation, the residual materials and tools inside the machine should be cleaned to ensure the cleanliness and safety of the machine. At the same time, the power should also be turned off for necessary maintenance and maintenance.

1. Preparation before startup

Before starting the organic fertilizer granulator, it is necessary to make adequate preparations. First of all, check whether the parts of the machine are intact, whether the lubrication system is normal, and whether the transmission system is flexible. Secondly, check whether the feeding system is smooth to avoid blockage. Finally, check whether the electrical control system is normal to ensure safety and reliability.

2. Precautions during operation

In the operation process of organic fertilizer granulator, the following points need to be noted:

(1) Control feed speed. Too fast feeding speed will lead to machine overload and affect the service life of organic fertilizer equipment; Too slow will affect productivity.

(2) Maintain proper temperature. Organic fertilizer granulation process needs to maintain the appropriate temperature, too high or too low temperature will affect the quality of the product.

(3) Clean the inside of the machine regularly. Organic fertilizer granulator will produce dust and particles in the process of use, regular cleaning can ensure the internal cleaning of the machine and improve production efficiency.

(4) Pay attention to safety. Organic fertilizer pelletizer needs to pay attention to safety during use to avoid electric shock and mechanical injury accidents.

3. Maintenance

The maintenance of organic fertilizer granulator is an important measure to ensure its normal operation. Regularly check the wear of each part of the machine, and replace the worn parts in time; Maintain the lubrication system regularly to ensure the normal operation of the organic fertilizer production line; Clean the residue inside the machine regularly to keep the machine clean.