As a kind of commonly used environmental protection equipment, hydraulic compost turning machine plays an important role in the treatment of organic waste. However, in the process of use, we found that some organic fertilizer equipment will emit serious abnormal noise, which not only affects the work efficiency, but also may cause health hazards to the operator. This article will introduce the cause of this problem and the solution.

1. Check whether the components of the equipment are fastened. Loosening may cause abnormal sound during device operation. The solution is to regularly check the fastening of each component of the equipment and tighten it in time.

2. Check whether the hydraulic system works normally. Failure of the hydraulic system may lead to pressure instability and abnormal sound. The solution is to perform regular maintenance on the hydraulic system to ensure its normal operation.

3. Check whether the bearing is worn. Bearing wear may lead to unstable operation of the equipment and abnormal noise. The solution is to replace the worn bearing to ensure the normal operation of the bearing.

In addition to the above mentioned solutions, there are other measures we can take to reduce the production of abnormal noise. For example, keep the environment quiet during the operation of the organic fertilizer production line and avoid operating the equipment in a noisy environment; Regular comprehensive inspection of the equipment to ensure the normal operation of all components; Reasonably arrange the use time of the equipment to avoid equipment damage caused by overuse.

With the rapid development of animal husbandry, animal manure pollution has become an environmental problem that cannot be ignored. Many farmer friends in the treatment of livestock and poultry manure, often choose to apply directly to the field, however, is this practice feasible?

First, we need to understand the composition of animal manure. It mainly includes organic matter, microorganism, nitrogen, phosphorus and other nutrient elements. However, untreated manure often contains a large number of pathogenic microorganisms and parasite eggs, which can contaminate soil and crops and even endanger human health if applied directly.

Secondly, the processing of organic fertilizer equipment can effectively improve the utilization efficiency of manure. Through mechanical treatment and fermentation, organic fertilizer equipment can convert manure into organic fertilizer that is easy to absorb and use, while killing harmful substances in it, reducing the harm to the environment and crops.

In addition, organic fertilizer production line processing can also improve fertilizer efficiency. The treated manure fertilizer is more uniform and long-lasting, providing a continuous supply of nutrients to crops and improving crop yield and quality.

Therefore, it is not feasible to directly apply livestock manure to farmland without processing organic fertilizer equipment. In order to protect the environment and the health of crops, we should choose to use organic fertilizer equipment to treat livestock and poultry manure, so as to improve the utilization efficiency of manure and achieve sustainable utilization of resources.

In the process of making organic manure from pig manure, the hydraulic compost turning machine plays a vital role. The application of this equipment not only improves the production efficiency of the organic fertilizer production line, but more importantly, it significantly improves the quality of the fertilizer.

The hydraulic trough tilting machine uses hydraulic drive to continuously tilting the material in the uninterrupted working process, ensuring that the nutrients in pig manure can be evenly mixed to avoid local over-ripening caused by accumulation. This organic fertilizer equipment has a strong flipping ability and can handle a large amount of pig manure, greatly improving production efficiency.

In addition, the process of turning is also an effective sterilization process, which can eliminate the bacteria and eggs that may exist in the pig manure, ensuring the sanitary quality of the organic fertilizer, so that the use of this fertilizer will not have a negative impact on the soil and crops.

In the production process of pig manure organic fertilizer, the use of hydraulic trough tossing machine also greatly reduces the manual participation, reduces the labor intensity and improves the safety of production. At the same time, due to the continuous work of the flipping machine, the pig manure has been fully fermented, and the fertilizer efficiency has been further improved.

In general, in the production process of pig manure organic fertilizer, the hydraulic trough turning machine not only improves the production efficiency, ensures the quality of the fertilizer, but also greatly reduces the manual participation and improves the safety of production. Its existence makes pig manure waste into treasure and makes a positive contribution to our environment.

Half-wet material crusher is an important equipment used to treat semi-wet materials, such as organic waste, crop residue, etc., in order to achieve efficient and environmentally friendly organic fertilizer production purposes. This paper will introduce the composition and function of the organic fertilizer equipment in detail.

I. Composition

1. Grinding blade set: This is the core part of the semi-wet material crusher, made of high hardness alloy steel, can effectively cut and crush a variety of organic materials.

2. Transmission system: including motor, pulley, chain, etc., responsible for driving the blade group to work.

3. Screen: used to filter the crushed material to ensure that the particle size meets the requirements.

4. Sealing cover: used to protect the operator from material splash damage.

5. Operation platform: It is convenient for operators to operate and maintain the machine.

Ii. Function

1. Cutting: The semi-wet material is cut into small pieces through the high-speed rotating blade group, which is convenient for subsequent processing.

2. Crushing: The material after cutting is further crushed into smaller particles to meet the requirements of organic fertilizer production.

3. Screening: Through the screen, it can screen out the particles that meet the requirements, while removing impurities.

4. Protect the environment: The equipment can effectively reduce the emission of organic waste and protect the environment.

Planning, design and location of organic fertilizer production line: The construction of organic fertilizer production line also has the principle of adapting to local conditions. To build an organic fertilizer production line, we must first determine the scale of the project and the location of the plant. The location of organic fertilizer production line is very important. Due to environmental protection and impact, the location of organic fertilizer production lines should grasp the following principles:

1, organic fertilizer plant can not be too far from the farm. Chicken manure, pig manure, cow manure, duck manure and other livestock manure is large, high water content, transportation is not convenient. If it is too far, the transportation cost of organic fertilizer plant is too high.

2, should not be too close to the breeding plant. Do not wind up in the breeding plant, otherwise it is easy to transmit diseases and bring difficulties to the epidemic prevention of the breeding plant.

Stay away from residents' living areas.Organic fertilizer equipmentwill produce malodorous gases in the production, and can not be in the resident living area or living area. 4, close to the main raw material origin, in order to reduce transportation costs and pollution. 4, the traffic is more convenient.

5, the water supply and power supply is convenient (organic fertilizer plant electricity for industrial electricity, under normal circumstances, the application of transformers need to meet the load of 200-300kw motor use, but the water consumption in the production process of organic fertilizer is less, as long as there is normal residential water).

Complete sets of organic fertilizer equipment has small, there are large, organic fertilizer production line market hot so that many investors eager to try, many users see organic fertilizer complete equipment processing capacity is strong, large output, investment profits are very considerable, want to understand the price of organic fertilizer complete equipment and more economical purchase program, in response to these problems, this article describes in detail. Common organic fertilizer equipment Organic fertilizer equipment There are many kinds of common equipment, such as organic fertilizer grinder, organic fertilizer dryer, organic fertilizer cooling machine, organic fertilizer granulator, automatic packaging machine. From the above we understand the types of organic fertilizer complete equipment, of course, each has a variety of different styles, take organic fertilizer granulator, there are drum granulator, roller extrusion granulator, spiral extrusion granulator, etc., different styles can also be divided into different models. Different equipment has different working methods and different structural designs, so different sets of organic fertilizer equipment will bring different economic benefits, and the corresponding price of organic fertilizer equipment will be low. In addition, because each manufacturer uses different technologies, procedures, materials and sales methods. Therefore, there is no way to give everyone a unified price list of organic fertilizer equipment.

With the strengthening of the national environmental protection management, the attention of social funds to the industry, the implementation of the national circular economy policy, the manure treatment method of large-scale large-scale chicken farms has also changed. Previously, it was mainly ecological utilization, and the accumulated chicken manure was directly returned to the field. However, with the development of biological fermentation technology, the production technology and equipment of chicken manure organic fertilizer are mature. The use of chicken manure to produce organic fertilizer has become a new measure. Through the research, development and manufacture of organic fertilizer technology, a set of chicken manure organic fertilizer production line equipment was developed. The operation of chicken manure organic fertilizer production disc granulation site is intuitive, and the operation status of organic fertilizer equipment can be mastered at any time, and it can be adjusted immediately when abnormal is found. The size of the particles depends on the inclination and speed of the disk, but the inclination rate and speed of the disc can be adjusted, so the pelletizing technology of the disc granulator has a wide range of particle size control, strong adaptability, and a very high ball rate. Chicken manure organic fertilizer plate granulation technology has short production process, simple structure, less investment, simple operation, suitable for small and medium-sized enterprises. The disc granulator produced by the company is a professional organic fertilizer equipment developed for the characteristics of organic fertilizer. Most of the raw material is composed of organic matter after fermentation, so no chemical reaction is required in the particle production process, no steam is required, only atomized water can be.

Pig manure organic fertilizer production line is an advanced production equipment that converts pig manure into organic fertilizer, with the following advantages:

1. Efficient production: The production line adopts advanced production technology and organic fertilizer equipment, which can efficiently convert pig manure into organic fertilizer, greatly improving production efficiency.

2. Environmental protection and safety: pig manure organic fertilizer production line adopts environmental protection technology, which has little pollution to the environment, and the organic fertilizer produced is non-toxic and harmless, safe and reliable, and meets the environmental protection requirements.

3. Low cost: pig manure organic fertilizer production line can make full use of pig manure resources, reduce waste, reduce production costs, and also bring certain economic benefits to the breeding industry.

4. Excellent quality: The organic fertilizer produced by the production line has high nutrient content and long-lasting fertilizer effect, which can meet the needs of plant growth and improve the quality and yield of crops.

5. Simple operation: pig manure organic fertilizer production line is simple and convenient to operate, easy to maintain, and can ensure the continuity and stability of production.

In short, the pig manure organic fertilizer production line has the advantages of efficient production, environmental protection and safety, low cost, good quality and simple operation, and is a kind of organic fertilizer production equipment with wide application prospects.

Double roller press granulator is a kind of molding machine that can make raw materials into specific shapes. The input of organic fertilizer is particularly good for roller granulator, with high granulation rate, no need for air drying, less project investment and quick effect. Its advantages:

1. Organic fertilizer roller granulator has no dry processing technology, normal temperature granulation, one-time molding, less investment in organic fertilizer production line engineering, good economic benefits.

2. Small driving force, reliable operation, no waste discharge, stable actual operation, easy maintenance, reasonable step layout, strong technology, low manufacturing cost.

3. Wide adaptability to raw materials, can be used for compound fertilizer, pharmaceutical industry, chemical plants, concentrated feed, coal, metallurgical industry and other raw materials granulation. Can produce various types of compound fertilizer with various concentration values.

4. Organic fertilizer roller granulator, especially rare earth, ammonium bicarbonate, ammonium sulfate compound fertilizer. Principle of organic fertilizer roller granulator: the motor drives the transmission belt and pulley, the transmission belt and pulley are transmitted to the gear shaft according to the reducer, and the open driving gear works with the driven shaft at the same time. The raw material is added from the silo, the formed pellets are extruded by two rollers, and then transported to the crushing chamber through a pair of transmission chains for crushing. The finished product (ball) is separated under the sieve, and the returned material is mixed with the new raw material and granulated. With the continuous operation of the motor.

In recent years, due to the increasing problem of environmental pollution, most factories, agriculture and aquaculture are prone to pollution. The development of organic fertilizer equipment has solved this problem well. In the past, organic fertilizer processing equipment was not advanced, and environmental governance may not be good. Under the active research work, new mechanical equipment will continue to appear, learn from each other and improve the performance of mechanical fertilizer processing equipment. With the development of these years, we can see the environmental protection of organic fertilizer processing equipment. At present, there is a special straw crusher in the organic fertilizer crusher, which is used for straw equipment to achieve the ideal purpose of crushing. Straw crusher is mainly used for cutting and processing cotton straw, bark, branches, corn straw, wheat straw and other biomass. The processed products can be used for power generation, papermaking, wood-based panels, extraction of n-hexanol, etc. Avoid entanglement of straw that you don't know how to deal with. The organic fertilizer equipment solves this problem, so that the product can be applied to other industries and play the role of waste utilization. Farm manure also has the corresponding special production and processing equipment, such as some cow manure, chicken manure organic fertilizer production and processing equipment, after drying and disinfection can produce organic fertilizer, and then applied to the farm, to provide the necessary growth nutrients for crops, so as to solve the pollution of fertilizer to the atmosphere, so that crops better growth.

1. Determine the output on the organic fertilizer production line. For example, how much is the annual output, or how much is the output per hour, you can determine the technical indicators of animal manure organic fertilizer production equipment.

2, the shape of the particle determines what kind of granulation equipment should be selected. Organic fertilizer granulator should be selected according to the preferences of the local fertilizer sales market. The granularity is different, the production process of organic fertilizer is different, and the price of organic fertilizer production equipment is also different.

3, animal manure organic fertilizer production equipment configuration advantages and disadvantages. The level of equipment configuration is different, which determines the level of equipment price, the level of labor and the level of stable operation ability of equipment.

4. Selection of fermentation compost turning machine. The general fermentation forms are bar, shallow groove, deep groove, tower, cylindrical shape, etc., different fermentation methods, fermentation of organic fertilizer equipment is also different.

5, the level of environmental protection requirements. Places with low environmental protection requirements generally use heavy dust removal, and there is less investment in organic fertilizer equipment; Places with high environmental protection requirements generally choose heavy dust removal plus ink dust removal, which can meet the national and air emission quality standards.

Maintenance and maintenance of mechanical parts: Due to the strong corrosion of organic fertilizer raw materials, the main body of organic fertilizer equipment is mostly made of high-grade stainless steel. Its advantages are corrosion resistance and wear resistance, but the corrosion resistance of most motors, bearings, etc., is poor. Therefore, when using, we should pay attention to the lubrication of various active parts, timely coating with lubricating oil, and timely cleaning and hygiene after a production cycle of the organic fertilizer production line, so that no material is stained and no leftover material is left. After the end of the production cycle, in addition to the necessary cleaning work, the equipment should be maintained and repaired as a whole. The main material can be disassembled and maintained, and the production will be carried out in the assembly in the next year to ensure that there is no rust and no man-made damage. Line maintenance: The line involved in organic fertilizer equipment is mainly a variety of signal lines and power lines, power lines for ordinary electricians is very important. Maintenance is relatively simple, but various signal lines are not suitable for maintenance, and must be carefully tested according to the control system drawings provided by the manufacturer. And do a good job of protecting all kinds of cables to prevent human smashing or being bitten by rats.

1, maintain the original and basic state of organic fertilizer equipment, maintain the initial main parameters of the design scheme: it is the most basic work, in other words, the first step to reduce the failure of organic fertilizer equipment is to repair the basic state of organic fertilizer equipment;

2, strictly implement the safety operation procedures, avoid and prevent devastating actual operation, avoid and prevent overload operation: most of the organic fertilizer equipment problems are caused by poor actual operation or maintenance is not timely, the practical significance of standard employee personal behavior is to avoid and reduce such simple reasons caused by organic fertilizer equipment problems;

3. Continuous detection, avoidance and repair of course deterioration, so that organic fertilizer equipment can be repaired in the potential failure state: The actual significance of independent maintenance belongs to the discovery and elimination of six source theme activities advocated by front-line employees to find problems in the first time, and a very important stage is to deal with the problem of fault sources;

4, correct the defective design scheme, the design scheme of organic fertilizer production line production shortcomings to carry out additional improvement of conscious maintenance;

5, to avoid human deterioration, to prevent human destruction, to avoid destructive maintenance;

6. Manipulate all abnormal external standards and accelerate the efficiency of organic fertilizer equipment deterioration

At present, the more reasonable way for the harmless treatment and recycling of organic chemical waste is to make organic fertilizer by using organic fertilizer equipment to carry out alcohol solution. Choosing organic fertilizer equipment manufacturers is the key, how to choose the right organic fertilizer production equipment manufacturers?

1, depends on the technical strength of organic fertilizer production equipment manufacturers, such as can provide organic fertilizer production line of a variety of raw materials alcohol processing technology, can provide a variety of fertilizer formulas.

2, for the organic fertilizer production manufacturers can provide detailed production plans, organic fertilizer production equipment manufacturers can carry out detailed CAD drawings in the overall planning of industrial plants, the installation of machinery and equipment.

3, in the fermentation processing technology, fertilizer formula, production program and fertilizer plant overall planning are agreed to carry out visits to organic fertilizer production equipment manufacturers, production workshop, production machinery and equipment to specifically grasp the overall strength of organic fertilizer equipment manufacturers, so as to ensure the quality of organic fertilizer equipment and in the late period to provide production service support.

4, in the selection of organic fertilizer production equipment manufacturers can not blindly choose cheap goods.

Therefore, in the selection of organic fertilizer production equipment manufacturers must carry out a comprehensive analysis do not have to be confused by the price of the eyes, after all, the machinery and equipment you buy back, not to buy it, but to buy it back, only organic fertilizer equipment durable and not disruptive can be used warm, can create a lot of economic value.

First, organic fertilizer equipment processing process

The processing process of organic fertilizer equipment mainly includes raw material collection, fermentation, granulation, wind separation, screening, packaging and other links. First of all, collect all kinds of organic waste, such as livestock and poultry manure, crop straw, food processing waste, etc., after fermentation treatment, remove the bacteria and eggs. Then, the fermented raw materials are air selected to remove large impurities. Then, granulation is carried out to process the raw material into a granular form to improve the fertilizer efficiency. Next, through the screening process, the granular raw material is carefully screened to further remove impurities. Finally, packaging is carried out, and the finished organic fertilizer is sealed and packaged for transportation and sales.

Second, organic fertilizer production line processing technology

1. Fermentation process: Aerobic fermentation technology is adopted to decompose organic waste by microorganisms, remove odor and improve fertilizer efficiency.

2. Granulation process: The high temperature extrusion granulation technology is used to process the fermented raw materials into granules. By controlling temperature and time, particles of different sizes and shapes can be produced.

3. Air separation process: The gap between the particles is blown open by the wind, so that the larger impurities float on the surface and are collected. This method can effectively remove large impurities.

4. Screening process: Fine screening of granular raw materials using different sizes of screens to further remove impurities.

In agricultural or industrial production, fermentation is a common chemical reaction process. In order to make the fermentation process proceed smoothly, some measures need to be taken, such as reasonable fermentation temperature, ventilation and so on. In actual operation, the use of fermentation compost turning machine has also become an indispensable means.

The main characteristics of the fermentation pile turning machine are as follows:

1. High degree of automation. The fermentation stacking machine has an automatic control function, which can automatically adjust the stacking times and stacking time according to the set conditions, reduce manual intervention, and improve the working efficiency of the organic fertilizer production line.

2, simple operation. The operation of the fermentation dump machine is very simple, you only need to press the button or start the equipment, you can automatically complete the dump operation without too much manual intervention.

3. Save manpower. Due to the high degree of automation of the stacking machine, it can greatly reduce the manual labor intensity, but also save a lot of human resources and reduce production costs.

4, improve the fermentation effect. The fermentation material is evenly turned by the organic fertilizer equipment, which can promote the uniform mixing and oxygen supply of the material, so as to improve the fermentation effect.

5. Strong adaptability. The fermentation stacking machine has a wide range of applicability and can be applied to different fermentation occasions and material types, such as compost production in agricultural production and fermentation process in industrial production.

Organic fertilizer has a broad market in China, after all, China as an agricultural country in recent years with the popularity of organic fertilizer, the use of organic fertilizer increased year by year, it is such a rapid development of organic fertilizer led to the rise of organic fertilizer equipment industry. How does the organic fertilizer equipment make the manure into organic fertilizer?

First of all, from the analysis of raw materials, the raw materials of organic fertilizer are mainly divided into the following types:

1, agricultural waste: such as straw, mushroom residue, lignin residue and other wastes common in daily life.

2, livestock manure: such as chicken, duck, pig, cow manure and other livestock manure.

3, industrial waste: such as wine lees, vinegar lees, cassava residue, sugar residue and other industrial waste.

4, domestic waste: such as food scraps and other garbage left over from daily life.

The raw materials often used to make organic fertilizer in daily life are mainly the above, and the organic fertilizer production line is made into organic fertilizer through a series of processing through various equipment to cooperate with these wastes, livestock manure, domestic waste, etc. The full and reasonable use of organic fertilizer can increase the output value of crops, improve the fertility of soil, improve the quality of agricultural production, and improve the effectiveness of soil nutrition. Thus greatly improve the income of farmers, domestic waste "waste into treasure" or even "waste into treasure" greatly improve the recycling rate of waste and play a positive role in environmental protection.