ichappsseo

1.0 PURPOSE:    
    To  describe a  standard operating procedure for   sending  out equipment for rectification to the outside  agency.    
2.0    SCOPE:    
    The standard o

1.0 PURPOSE:
    
    To  describe  a  standard operating procedure  for  breakdown rectification of leaf filters.
    
2.0    SCOPE:
    
    The standard operating procedur

1.0 PURPOSE:
    
    To  describe  a  standard operating procedure  for  breakdown rectification of pressure filters.
    
2.0    SCOPE:
    
    The standard operating proc

1.0 PURPOSE:   

    To  describe  a  standard operating procedure  for  breakdown rectification of sifter.    
2.0    SCOPE:    
    The standard operating procedure describes

1.0    PURPOSE:
    
    To describe a  standard operating procedure for replacement  of  coupling bolts of reactors.
    
2.0    SCOPE:
    
    The standard operating procedure

1.0    PURPOSE:
    
    To describe a standard operating procedure for replacement of bearings of process / utilities / laboratory equipment.
    
2.0    SCOPE:
    
    The standard operating

1.0 PURPOSE:
    
    To describe a  standard operating procedure for replacement  of oil seals  of gear boxes.
    
2.0    SCOPE:
    
    The standard operating procedure describes i

1.0 PURPOSE:
    
    To  describe  standard operating procedure for calibration  of  storage tanks. 
    
2.0    SCOPE:
    
    The standard  operating  procedure

1.0 PURPOSE:
    
    To describe  standard operating procedure for installation  of  distilled water plant. 
    
2.0    SCOPE:
    
    The  standard  operating  

1.0    PURPOSE:

1.1    To lay down a procedure for Operation of HPLC (Shimadzu with LC 10AT and SPD-M10 AVP). 

2.0    SCOPE:

1.2    This SOP is applicable for HPLC (Shimadzu with LC 10AT and SPD-M10 AVP) in quality control dep

1.0    PURPOSE:

1.1    To lay down a procedure for Operation of HPLC (Shimadzu with millennium software).

2.0    SCOPE:

2.1    This SOP is applicable for Operation of HPLC (Shimadzu with millennium software) in Quality control depa

1.    OBJECTIVE

1.1    To lay down the procedure for operation of HPLC (Shimadzu) -equipment identification number: LAB3 

2.      RESPONSIBILITY

2.1         Sr.Assitant-QC

2.2