1.0 Purpose:
To lay down the procedure for environmental monitoring of bio-load in controlled areas by using settle plates, air sampling and contact plate.
2.0 Scope:
This procedure applicabl
1.0Purpose:
To lay down the procedure for Investigation of out of specification (OOS) results in Microbiology.
2.0Scope :
This procedure is applicable to Investigation of out of specification (OOS) results in microbial testing of Non-Sterile Products, Water Samples, and Environ
1.0 Purpose:
To lay down the procedure for conducting the Bacterial Endotoxin Test of Purified Water and Operation of Cyclomixer.
2.0 Scope:
This procedure applies to testing of bacterial endotoxins for purified w
1.0 Purpose :
To lay down the procedure to be followed for cleaning of glassware and sterilization glassware and microtips.
2.0 Scope
1.0 Purpose :
To lay down the Procedure to test the efficacy of UV lamp against microbial challenge.
2.0Scope :
This
1.0 Purpose :
To lay down the Procedure for Isolation,Identification and Gram Staining of Microorganisms.
2.0 Scope &nbs
1.0 PURPOSE:
To describe a standard operating procedure for welding the damaged jacket of reactor.
2.0 SCOPE:
The standard operating procedure descr
1.0 PURPOSE:
To describe a standard operating procedure for repairing/replacing of agitator/shaft of reactors.
2.0 SCOPE:
1.0 PURPOSE:
To describe a standard operating procedure for replacement of damaged couplings/pulleys of reactors, pumps, motors and gear boxes.
2.0 SCOPE:
1.0 PURPOSE:
To describe a standard operating procedure for replacement of V-belts of reactors, vacuum pumps, compressors, air compressors, centrifuges, blowers etc.
2.0 SC
1.0 PURPOSE:
To describe a standard operating procedure for sending out equipment for rectification to the outside agency.
2.0 SCOPE:
The standard o
1.0 PURPOSE:
To describe a standard operating procedure for breakdown rectification of leaf filters.
2.0 SCOPE:
The standard operating procedur